[Docs] define Phase 3 raw artifact archive

This commit is contained in:
Zhiyi Hong 2026-08-03 10:03:35 +08:00
parent 41e2b000a4
commit 56d286bb4e
3 changed files with 13 additions and 0 deletions

1
.gitattributes vendored Normal file
View File

@ -0,0 +1 @@
*.nsys-rep filter=lfs diff=lfs merge=lfs -text

View File

@ -1,5 +1,9 @@
# sskj — 多平台大模型推理性能基准测试项目 # sskj — 多平台大模型推理性能基准测试项目
> **更新2026-08-03 10:02:07 CST**
>
> 将 DeepSeek-V4-Pro 双机 Pro6000D SGLang Phase 3 正式 Run `dsv4pro-phase3-20260802-003213` 的原始实验产物纳入 GitLab `hzy` 分支。六份 `.nsys-rep` 通过 Git LFS 保存,普通 Git 保存 Manifest、完整启动/Bench 命令、请求与响应、服务/NCCL 日志、Bench JSONL 和 `nsys stats`。约 2.44 GB 的临时 `.sqlite` 不上传,因为它可由 `.nsys-rep` 重新导出且不构成独立证据。
>
> **更新2026-08-02 01:25:30 CST** > **更新2026-08-02 01:25:30 CST**
> >
> 完成 DeepSeek-V4-Pro 双机 Pro6000D SGLang Phase 3 时间线 Profiling。正式 Run `dsv4pro-phase3-20260802-003213` 在 21 分 03 秒内完成 Decode Control、Decode+128K Prefill Mixed、独立 128K Prefill 三段 CaptureHead/Worker 各生成 3 份 Nsight Systems 报告及 Stats合计 6/6 校验通过。Control 以 GEMM/MoEHead 44.7%)和 NCCL31.9%为主Mixed 中 NSA/MLA 升至 29.7%NCCL 为 23.1%,说明 Chunked Prefill 的 Sparse Attention/MLA 计算进入同一 TP16 GPU 关键路径。Prefill Trace 漏采 3 个 Rank 的 CUDA 活动,因此暂不判断固定慢 Rank也不将 NCCL 单独定性为根因。实验结束后两节点容器和 16 张 GPU 均已清理。 > 完成 DeepSeek-V4-Pro 双机 Pro6000D SGLang Phase 3 时间线 Profiling。正式 Run `dsv4pro-phase3-20260802-003213` 在 21 分 03 秒内完成 Decode Control、Decode+128K Prefill Mixed、独立 128K Prefill 三段 CaptureHead/Worker 各生成 3 份 Nsight Systems 报告及 Stats合计 6/6 校验通过。Control 以 GEMM/MoEHead 44.7%)和 NCCL31.9%为主Mixed 中 NSA/MLA 升至 29.7%NCCL 为 23.1%,说明 Chunked Prefill 的 Sparse Attention/MLA 计算进入同一 TP16 GPU 关键路径。Prefill Trace 漏采 3 个 Rank 的 CUDA 活动,因此暂不判断固定慢 Rank也不将 NCCL 单独定性为根因。实验结束后两节点容器和 16 张 GPU 均已清理。

View File

@ -68,3 +68,11 @@ results/<RUN_ID>/
Profiler runs are diagnostic and must not replace the Phase 2 no-profiler TPS Profiler runs are diagnostic and must not replace the Phase 2 no-profiler TPS
baseline. baseline.
## Archived formal run
The complete reproducible evidence set for `dsv4pro-phase3-20260802-003213`
is committed under `results/` on the `hzy` branch. Six `.nsys-rep` files use
Git LFS; commands, logs, JSONL, request/response payloads, stats, and the run
manifest use regular Git. Temporary `.sqlite` exports are intentionally
excluded because `nsys stats` can regenerate them from the reports.